| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.414 INCHES NOMINAL |
| DISTANCE FROM FLANGE TO END | 0.420 INCHES NOMINAL |
| FLANGE LENGTH | 1.750 INCHES MINIMUM AND 1.812 INCHES MAXIMUM |
| FLANGE MOUNTING HOLE DIAMETER | 0.177 INCHES NOMINAL |
| FLANGE THICKNESS | 0.120 INCHES NOMINAL |
| FLANGE WIDTH | 1.089 INCHES MINIMUM AND 1.151 INCHES MAXIMUM |
| HEIGHT | 0.720 INCHES NOMINAL |
| INSIDE DIAMETER | 0.164 INCHES NOMINAL |
| LOAD RATING | 10.0 POUNDS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 1010 ASSN STD SINGLE MATERIAL RESPONSE WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 1113 ASSN STD SINGLE MATERIAL RESPONSE CORE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8, ALLOY 5052 FED SPEC SINGLE MATERIAL RESPONSE PLATE |
| MATERIAL | ALUMINUM ALLOY PLATE |
| MATERIAL | STEEL CORE |
| MATERIAL | STEEL WASHER |
| NONMETALLIC HARDNESS RATING | 4515.0 NOMINAL SHORE DUROMETER A |
| SPECIAL FEATURES | 0.164-32 NC-2B THREADED CENTER HOLE 0.480 IN. DEEP; MTG FLANG HOLES COUNTERSINK 82.0 DEG 0.337 IN. DIA |
| STATIC LOAD RATING AT SPECIFIED DEFLECTION | 0 TO 10.0 LB LOAD RATING AT 0.010 DEFLECTION |
| STYLE DESIGNATOR | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CLASS 1A OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE PLATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE CORE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
| SURFACE TREATMENT | CHROMATE PLATE |
| SURFACE TREATMENT | ZINC CORE |
| SURFACE TREATMENT | ZINC WASHER |