|
|
|
National Stock Number:
5340-01-273-2371
Federal Supply Class:
5340
National Item Identification Number:
012732371
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| 81183-11 | 82340 | L3HARRIS TECHNOLOGIES, INC. | | MS20001 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20001-P4-2825 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20001P4-2825 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE TYPE | FRICTION | | KNUCKLE QUANTITY | 57 | | OVERALL LENGTH | 28.230 INCHES MINIMUM AND 28.270 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.044 INCHES MINIMUM AND 0.056 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 2024 BODY | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 PIN | | PERFORMANCE TYPE | NOT RATED | | PIN DIAMETER | 0.173 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | PIN CENTER TO BODY EDGE DISTANCE | 0.625 INCHES NOMINAL | | PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE PIN | | SURFACE TREATMENT | CADMIUM PIN | | SURFACE TREATMENT | ANODIZE BODY |
|
|