|
|
|
National Stock Number:
5340-01-247-1214
Federal Supply Class:
5340
National Item Identification Number:
012471214
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 717612226-001 | 04939 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.900 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.345 INCHES MINIMUM AND 0.355 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.212 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.161 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.149 INCHES MAXIMUM | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.175 INCHES NOMINAL | | FIRST LEG WIDTH | 0.345 INCHES MINIMUM AND 0.355 INCHES MAXIMUM | | FIRST LEG LENGTH | 0.800 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T651 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.420 INCHES NOMINAL | | SECOND LEG WIDTH | 0.150 INCHES NOMINAL | | SECOND LEG LENGTH | 1.810 INCHES NOMINAL | | SPECIAL FEATURES | SECOND LEG HAS HOLE THRU WIDTH 0.144 IN. NOM DIA; CENTER SECTION CHAMFERED | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|