| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.156 INCHES NOMINAL |
| FIRST LEG ANGLE | 95.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.130 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.440 INCHES MINIMUM AND 1.560 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.370 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.370 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 0.740 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.130 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.156 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.440 INCHES MINIMUM AND 1.560 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |