| CENTER SECTION HEIGHT | 2.500 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL |
| CENTER SECTION WIDTH | 2.560 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.450 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.440 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.406 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.190 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.440 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/7 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/8 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 4.560 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.190 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.560 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |