| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.800 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.240 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.231 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.630 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.200 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.225 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.625 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.400 INCHES MINIMUM AND 1.440 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.137 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.500 INCHES MINIMUM AND 1.540 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |