| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.312 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CUTOUT LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG CUTOUT WIDTH | 1.135 INCHES MINIMUM AND 1.145 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.800 INCHES NOMINAL |
| FIRST LEG STYLE | CUT OUT |
| FIRST LEG THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.133 INCHES MINIMUM AND 0.139 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.310 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.810 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG CUTOUT LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 1.430 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| SECOND LEG STYLE | CUT OUT |
| SECOND LEG THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| SECOND LEG WIDTH | 2.312 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG CUT OUT RADIUS 0.060 IN.,CUT ON A 10 DEG ANGLE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |