|
|
|
National Stock Number:
5340-01-243-9500
Federal Supply Class:
5340
National Item Identification Number:
012439500
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 917AS7070 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.344 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.299 INCHES NOMINAL | | FIRST LEG SLOT LENGTH | 0.900 INCHES NOMINAL | | FIRST LEG SLOT WIDTH | 0.228 INCHES MINIMUM AND 0.238 INCHES MAXIMUM | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM | | FIRST LEG END WIDTH | 1.740 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | FIRST LEG LENGTH | 0.650 INCHES NOMINAL | | FIRST LEG WIDTH | 3.620 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 403 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG LENGTH | 0.650 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1,TY 2,TY 3 OR TY 4 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|