| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.820 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.626 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.626 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.118 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES |
| MATERIAL | STEEL COMP 1008 OR STEEL COMP 1010 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.329 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.560 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.820 INCHES NOMINAL |
| SECOND LEG OFFSET ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.118 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| SECOND LEG LENGTH | 6.526 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.000 INCHES NOMINAL |
| SPECIAL FEATURES | COLOR GREEN; SECOND LEG HAS 45.0 DEG CHAMFER ON ONE CORNER; RIGHT HAND |
| STYLE DESIGNATOR | OFFSET ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GM 9984064,CAGEC 11862 MFR REF 1ST TREATMENT RESPONSE OR MIL-C-46168 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL OR PLASTIC POLYURETHANE |