| FEATURES PROVIDED | NUT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.248 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.875 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.623 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.742 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.155 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.370 INCHES MINIMUM AND 3.390 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.625 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.258 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.625 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.252 INCHES MINIMUM AND 0.262 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.437 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.883 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.370 INCHES MINIMUM AND 3.390 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | LACQUER |