| CENTER SECTION HEIGHT | 0.041 INCHES MINIMUM AND 0.051 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG THICKNESS | 0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG LENGTH | 0.141 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1010 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 135.0 DEGREES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG END WIDTH | 0.108 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.094 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT | NICKEL |