| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 7.690 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.130 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.660 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.370 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.750 INCHES NOMINAL |
| FIRST LEG WIDTH | 9.690 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A656,TY 7,MODIFIED TO 0.010 PERCENT SULFER CONTENT ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.120 NOMINAL INCHES |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 7.440 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 3.720 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.780 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.120 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.370 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.000 INCHES NOMINAL |
| SECOND LEG WIDTH | 9.690 INCHES NOMINAL |
| SPECIAL FEATURES | 0.500 IN. RADIUS AT BEND; MIN YIELD STRENGTH 80000 PSI |
| STYLE DESIGNATOR | ANGLE |