| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.190 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.250 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/3 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 2024 |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.125 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.233 INCHES MINIMUM AND 0.244 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.530 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | TWO SLOTS OPENED TO EDGE,ONE SLOT IS AT A 45 DEG ANGLE;STRAIGHT SLOT 0.568 IN.MIN AND 0.588 IN. MAX WIDE; OPPOSITE OF DASH 1 |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E529 TY 1 FED SPEC SINGLE TREATMENT RESPONSE OR TT-E-529 TY 2 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL SEMIGLOSS |