| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 5.370 INCHES MINIMUM AND 5.380 INCHES MAXIMUM |
| DISTANCE FROM FLANGE TO END | 1.780 INCHES MINIMUM AND 1.905 INCHES MAXIMUM |
| FLANGE LENGTH | 6.500 INCHES NOMINAL |
| FLANGE MOUNTING HOLE DIAMETER | 0.656 INCHES NOMINAL |
| FLANGE WIDTH | 4.750 INCHES NOMINAL |
| FLANGE THICKNESS | 0.622 INCHES MINIMUM AND 0.628 INCHES MAXIMUM |
| HEIGHT | 3.686 INCHES NOMINAL |
| INSIDE DIAMETER | 0.766 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| LOAD RATING | 450.0 POUNDS MAXIMUM |
| LOAD/FREQUENCY RANGE | 450.0 LB LOAD FOR 5.0 TO 6.2 HERTZ |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-20166, GRADE M MIL SPEC SINGLE MATERIAL RESPONSE BUSHING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-20166, GRADE M MIL SPEC SINGLE MATERIAL RESPONSE SPACER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-20166, GRADE M MIL SPEC SINGLE MATERIAL RESPONSE WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-21952, TYPE B MIL SPEC SINGLE MATERIAL RESPONSE MOUNTING PLATE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-21952, TYPE B MIL SPEC SINGLE MATERIAL RESPONSE PLATE |
| MATERIAL | STEEL BUSHING |
| MATERIAL | STEEL MOUNTING PLATE |
| MATERIAL | STEEL PLATE |
| MATERIAL | STEEL SPACER |
| MATERIAL | STEEL WASHER |
| NONDEFINITIVE SPEC/STD DATA | 6-450 TYPE |
| NONMETALLIC HARDNESS RATING | 40.0 MINIMUM SHORE DUROMETER A AND 50.0 MAXIMUM SHORE DUROMETER A |
| STATIC LOAD RATING AT SPECIFIED DEFLECTION | 450 POUND LOAD RATING AT 0.300 TO 0.400 INCH DEFLECTION |
| STYLE DESIGNATOR | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |