| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.371 INCHES MINIMUM AND 1.379 INCHES MAXIMUM |
| FLANGE LENGTH | 1.820 INCHES MAXIMUM |
| FLANGE MOUNTING HOLE DIAMETER | 0.201 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| FLANGE WIDTH | 1.820 INCHES MAXIMUM |
| HEIGHT | 1.320 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| LOAD RATING | 10.0 POUNDS MAXIMUM |
| LOAD/FREQUENCY RANGE | NOT RATED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/5, ALLOY 2017 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-371, ALLOY 308.2 FED SPEC SINGLE MATERIAL RESPONSE HOLDER |
| MATERIAL | ALUMINUM ALLOY HOLDER |
| MATERIAL | ALUMINUM ALLOY INNER MEMBER |
| MATERIAL | STEEL CORROSION RESISTING WASHER |
| SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.371 INCHES MINIMUM AND 1.379 INCHES MAXIMUM |
| SPECIAL FEATURES | RESILIENT MEMBER MATERIAL IS RUBBER,SILICONE,BTR |
| STYLE DESIGNATOR | ROUND W/FLANGED BUSHING FOUR-HOLE FLANGE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-A-8625, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| SURFACE TREATMENT | CHROMATE OR ANODIZE INNER MEMBER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-L-32 FED SPEC SINGLE TREATMENT RESPONSE HOLDER |
| SURFACE TREATMENT | LACQUER HOLDER |
| SURFACE TREATMENT | PASSIVATE WASHER |