|
|
|
National Stock Number:
5340-00-243-6193
Federal Supply Class:
5340
National Item Identification Number:
002436193
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A-A-218 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | ANSI A156.1 A8133 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | FFH116 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BODY WIDTH | 3.500 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL MORTISE | | KNUCKLE QUANTITY | 5 | | KNUCKLE TYPE | FRICTION | | MATERIAL THICKNESS | 0.123 INCHES NOMINAL | | MATERIAL | STEEL BODY | | MATERIAL | STEEL BUTTON TIP | | MATERIAL | STEEL PIN | | MOUNTING HOLE DIAMETER | 0.182 INCHES NOMINAL | | MOUNTING HOLE QUANTITY | 6 | | NONDEFINITIVE SPEC/STD DATA | 2127 TYPE | | PERFORMANCE TYPE | REGULAR DUTY | | PIN CENTER TO BODY EDGE DISTANCE | 1.750 INCHES NOMINAL | | PIN REMOVABILITY | REMOVABLE | | PIN TIP STYLE | FLAT BUTTON | | REVERSIBLE FEATURE | NOT INCLUDED | | RISING PIN | NOT INCLUDED | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FF-H-116, USP FED SPEC SINGLE TREATMENT RESPONSE BODY | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FF-H-116, USP FED SPEC SINGLE TREATMENT RESPONSE BUTTON TIP | | SURFACE TREATMENT | PRIMER BODY | | SURFACE TREATMENT | PRIMER BUTTON TIP |
|
|