|
|
|
National Stock Number:
5340-00-229-4302
Federal Supply Class:
5340
National Item Identification Number:
002294302
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| MS27958 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27958-20 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY WIDTH | 4.000 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE QUANTITY | 5 | | KNUCKLE TYPE | FRICTION | | MATERIAL THICKNESS | 0.130 INCHES NOMINAL | | MATERIAL | COPPER ALLOY 260 OR COPPER ALLOY 262 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OR COPPER ALLOY 272 OR COPPER ALLOY 274 OR COPPER ALLOY 280 OR COPPER ALLOY 330 OR COPPER ALLOY 331 OR COPPER ALLOY 332 OR COPPER ALLOY 335 OR COPPER ALLOY 340 OR COPPER ALLOY 342 OR COPPER ALLOY 344 OR COPPER ALLOY 345 OR COPPER ALLOY 347 OR COPPER ALLOY 348 OR COPPER ALLOY 350 OR COPPER ALLOY 353 OR COPPER ALLOY 356 OR COPPER ALLOY 360 OR COPPER ALLOY 370 BODY | | MATERIAL | STEEL COMP 303 PIN | | MOUNTING HOLE DIAMETER | 0.221 INCHES NOMINAL | | MOUNTING HOLE QUANTITY | 8 | | PERFORMANCE TYPE | NOT RATED | | PIN CENTER TO BODY EDGE DISTANCE | 2.000 INCHES NOMINAL | | PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE BODY | | SURFACE TREATMENT | NICKEL BODY |
|