|
|
|
National Stock Number:
5330-01-096-0486
Federal Supply Class:
5330
National Item Identification Number:
010960486
Description:
SEAL,NONMETALLIC STRIP
Detail:
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED.
|
Manufacturer Information:
| 112920-3 | 94271 | LOCKHEED MARTIN CORP | | LO1294 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | P00236NRP | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | PO010960486 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA |
|
Techincal Specification:
| ATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG LENGTH | 3.031 INCHES NOMINAL | | ATTACHMENT FEATURE QUANTITY | 5 | | ATTACHMENT HOLE DIAMETER | 0.250 INCHES NOMINAL | | ATTACHMENT METHOD | ROUND HOLE | | CONSTRUCTION | SOLID | | CRITICALITY CODE JUSTIFICATION | ZZZY | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | CROSS-SECTIONAL HEIGHT | 0.625 INCHES NOMINAL | | CROSS-SECTIONAL WIDTH | 0.062 INCHES NOMINAL | | FABRICATION METHOD | SOLID | | OVERALL LENGTH | 13.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6130 TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO LO1294 | | STYLE DESIGNATOR | STRIP | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|