|
|
|
National Stock Number:
5330-01-076-9444
Federal Supply Class:
5330
National Item Identification Number:
010769444
Description:
SEAL,NONMETALLIC STRIP
Detail:
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED.
|
Manufacturer Information:
| 121396-3 | 94271 | LOCKHEED MARTIN CORP | | LO1313 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | PO010769444 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA |
|
Techincal Specification:
| END CUT DEPTH | 0.125 INCHES NOMINAL0.125 INCHES NOMINAL | | END CUT LENGTH | 1.500 INCHES NOMINAL1.500 INCHES NOMINAL | | CONSTRUCTION | SOLIDSOLID | | CRITICALITY CODE JUSTIFICATION | ZZZYZZZY | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULARRECTANGULAR | | CROSS-SECTIONAL HEIGHT | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL | | CROSS-SECTIONAL WIDTH | 0.188 INCHES NOMINAL0.188 INCHES NOMINAL | | FABRICATION METHOD | CELLULAR, UNEXPLODEDCELLULAR, UNEXPLODED | | OVERALL LENGTH | 74.875 INCHES NOMINAL74.875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6130 TY 2,GR A,MEDIUM MIL SPEC SINGLE MATERIAL RESPONSE OVERALLMIL-R-6130 TY 2,GR A,MEDIUM MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALLRUBBER CHLOROPRENE CLASS CR OVERALL | | SMOOTH FINISH SURFACE LOCATION | SIDESIDE | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTINGSPECIFICATIONS AVAILABLE AT THE DLA ICP.REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTINGSPECIFICATIONS AVAILABLE AT THE DLA ICP. | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1313.ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1313. | | STYLE DESIGNATOR | STRIPSTRIP |
|
|