|
|
|
National Stock Number:
5330-01-070-2127
Federal Supply Class:
5330
National Item Identification Number:
010702127
Description:
SEAL,NONMETALLIC STRIP
Detail:
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED.
|
Manufacturer Information:
| 13217E0501-2 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 13217E0501-2 | 59678 | US ARMY ARMAMENT RESEARCH DEVELOPEMENT ENGINEERING CENTER |
|
Techincal Specification:
| ATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG LENGTH | 4.000 INCHES NOMINAL4.000 INCHES NOMINAL | | ATTACHMENT FEATURE QUANTITY | 2424 | | ATTACHMENT HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.220 INCHES MINIMUM AND 0.256 INCHES MAXIMUM0.256 INCHES MAXIMUM | | ATTACHMENT METHOD | ROUND HOLEROUND HOLE | | CONSTRUCTION | SOLIDSOLID | | CROSS-SECTIONAL HEIGHT | 2.375 INCHES NOMINAL2.375 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULARRECTANGULAR | | CROSS-SECTIONAL WIDTH | 0.062 INCHES NOMINAL0.062 INCHES NOMINAL | | FABRICATION METHOD | SOLIDSOLID | | OVERALL LENGTH | 45.500 INCHES NOMINAL45.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D2000 -3BA510A14B13C12EA11F39 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM D2000 -3BA510A14B13C12EA11F39 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER BUTADIENE-STYRENE CLASS SBR OVERALLRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL | | SMOOTH FINISH SURFACE LOCATION | SIDESIDE | | SPECIAL FEATURES | 12 HOLES EQUALLY SPACED ALONG LENGTH ON BOTH EDGES,0.750 INCH FROM EACH END,0.188 INCH DISTANCE FROM EDGE TO CENTER OF BOLT HOLES ALONG LENGTH OF BOTH EDGES12 HOLES EQUALLY SPACED ALONG LENGTH ON BOTH EDGES,0.750 INCH FROM EACH END,0.188 INCH DISTANCE FROM EDGE TO CENTER OF BOLT HOLES ALONG LENGTH OF BOTH EDGES | | STYLE DESIGNATOR | STRIPSTRIP |
|
|