5330-00-618-5691, GASKET

National Stock Number:
5330-00-618-5691

Federal Supply Class:
5330

National Item Identification Number:
006185691

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

9075030

18876

U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

APERTURE LENGTH	11.000 INCHES NOMINAL
APERTURE WIDTH	4.000 INCHES NOMINAL
BOLT HOLE QUANTITY	16
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.922 INCHES MINIMUM AND 1.954 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	2.296 INCHES MINIMUM AND 2.328 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.125 INCHES NOMINAL
FSC APPLICATION DATA	GUIDED MISSILE REMOTE CONTROLSYSTEM GROUND
HARDNESS RATING	35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.203 INCHES MINIMUM AND 0.218 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.312 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.312 INCHES NOMINAL
OVERALL LENGTH	12.250 INCHES NOMINAL
OVERALL WIDTH	5.250 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D2000 4AA420 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	RUBBER POLYISOPRENE NATURAL CLASS NR OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OR RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OR RUBBER POLYISOPRENE SYNTHETIC CLASS IR OVERALL
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial