|
|
|
National Stock Number:
5320-01-590-9887
Federal Supply Class:
5320
National Item Identification Number:
015909887
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| HL645-12-13 | 17446 | HUCK INTERNATIONAL, INC | | HL645-12-13 | 56878 | SPS TECHNOLOGIES, LLC | | HL645-12-13 | 60516 | WEST COAST AEROSPACE, INC. | | HL645-12-13 | 60725 | RUETGRS-NEASE CHEMICAL CO INC | | HL645-12-13 | 73197 | HI-SHEAR CORPORATION | | HL645-12-13 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.347 INCHES MINIMUM AND 1.367 INCHES MAXIMUM | | GRIP LENGTH | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.555 INCHES MINIMUM AND 0.560 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | SOLID FILM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHANK DIAMETER | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | SPECIAL FEATURES | THREAD ROLLED PER MIL-S-8879 (MODIFIED) MAJOR DIAMETER SHALL BE .364 TO .368 INCHES. | | WIDTH BETWEEN FLATS | 0.158 INCHES MINIMUM AND 0.161 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|