|
|
|
National Stock Number:
5320-01-241-1579
Federal Supply Class:
5320
National Item Identification Number:
012411579
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 10112290 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3M923C4-7 | 76301 | THE BOEING COMPANY | | HLT33TB-8-7M | 06725 | SPS TECHNOLOGIES, LLC | | HLT33TB-8-7M | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT33TB-8-7M | 17446 | HUCK INTERNATIONAL, INC | | HLT33TB-8-7M | 56878 | SPS TECHNOLOGIES, LLC | | HP923C4-7 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | HLT33TB-8-9M | 17446 | HUCK INTERNATIONAL, INC | | HLT33TB-8-7M | 60516 | WEST COAST AEROSPACE, INC. | | HLT33TB-8-7M | 73197 | HI-SHEAR CORPORATION | | HLT33TB-8-7M | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT33TB-8-7M | 97928 | HUCK INTL INC | | HLT33TB-8-7M | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.780 INCHES MINIMUM AND 0.800 INCHES MAXIMUM | | GRIP LENGTH | 0.443 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.5066 INCHES MAXIMUM | | HEAD STYLE | CROWN COUTERSUNK GREATER THAN 135 DEGREES | | LUBRICATION | SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF | | WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
|
|