|
|
|
National Stock Number:
5320-01-214-3563
Federal Supply Class:
5320
National Item Identification Number:
012143563
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| GB510DP6-12 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HL170JT-5-12 | 97928 | HUCK INTL INC | | HL415-12-12 | 56878 | SPS TECHNOLOGIES, LLC | | HL415-12-12 | 73197 | HI-SHEAR CORPORATION | | HL415-12-12 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL415-12-12 | 97928 | HUCK INTL INC | | HL710JT-5-12 | 06725 | SPS TECHNOLOGIES, LLC | | HL710JT-5-12 | 08524 | DEUTSCH FASTENER CORP | | HL710JT-5-12 | 17446 | HUCK INTERNATIONAL, INC | | HL710JT-5-12 | 56878 | SPS TECHNOLOGIES, LLC | | HL710JT-5-12 | 60516 | WEST COAST AEROSPACE, INC. | | HL710JT-5-12 | 73197 | HI-SHEAR CORPORATION | | HL710JT-5-12 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL710JT-5-12 | 97928 | HUCK INTL INC | | HL710JT-5-12 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM | | GRIP LENGTH | 0.755 INCHES MAXIMUM | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL | | HEAD MAJOR DIAMETER | 0.5604 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHANK DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.1582 INCHES MINIMUM AND 0.1617 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|