|
|
|
National Stock Number:
5320-01-168-7748
Federal Supply Class:
5320
National Item Identification Number:
011687748
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 10111993 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3M757C5-21-109 | 76301 | THE BOEING COMPANY | | HLT265TB-10-21-1 | 17446 | HUCK INTERNATIONAL, INC | | HLT265TB-10-21-109 | 17446 | HUCK INTERNATIONAL, INC | | HLT265TB-10-21-109 | 56878 | SPS TECHNOLOGIES, LLC | | HLT265TB-10-21-109 | 60516 | WEST COAST AEROSPACE, INC. | | HLT265TB-10-21-109 | 73197 | HI-SHEAR CORPORATION | | ST3M757C5-21-109 | 76301 | THE BOEING COMPANY | | HLT265TB-10-21-109 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HLT265TB-10-21-109 | 97928 | HUCK INTL INC | | HLT265TB-10-21-109 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | CRITICALITY CODE JUSTIFICATION | FEAT | | FASTENER LENGTH | 1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM | | GRIP LENGTH | 1.317 INCHES MAXIMUM | | HARDNESS RATING | 44.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.1465 INCHES NOMINAL | | HEAD MAJOR DIAMETER | 0.6335 INCHES MAXIMUM | | HEAD STYLE | COUNTERSUNK W/REVERSE CHAMFER | | LUBRICATION | SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | MINIMUM TENSILE STRENGTH | 210000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.312 INCHES | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SPECIAL FEATURES | 0.138-32UNJC-3B THREADED CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE OF HEAD END 0.300 IN. MIN,0.345 IN. MAX DP,0.120 IN. SLOT LG,0.060 IN. SLOT W LOCATED 1.090 IN. FROM TOP OF HEAD TO BEGINNING OF SLOT | | SHANK DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|