|
|
|
National Stock Number:
5320-01-098-0721
Federal Supply Class:
5320
National Item Identification Number:
010980721
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 99241326 | F6481 | THALES SA | | CR1921M05S03 | 11815 | SPS TECHNOLOGIES, LLC | | MLS100-M05-S03 | 0HDW7 | HUCK INTERNATIONAL, INC. | | MLS100-M05-S03 | 17446 | HUCK INTERNATIONAL, INC | | MLS100-M05-S03 | 29666 | HUCK MFG CO | | NAS1921-M05-S03 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | SMLS100-M05-03 | F6167 | HUCK |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.326 INCHES NOMINAL | | GRIP LENGTH | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.286 INCHES NOMINAL | | MATERIAL | NICKEL ALLOY SLEEVE | | MATERIAL | STEEL CORROSION RESISTING EXPANDER | | MINIMUM TENSILE STRENGTH | 1050 POUNDS PER SQUARE INCH | | SHANK DIAMETER | 0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM | | SHEAR STRENGTH | 1565 SINGLE POUNDS PER SQUARE INCH | | SHANK STYLE | SELF-PLUGGING | | SURFACE TREATMENT | CADMIUM OR PASSIVATE EXPANDER |
|
|