|
|
|
National Stock Number:
5315-01-616-6461
Federal Supply Class:
5315
National Item Identification Number:
016166461
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| HS5678C3-1-3 | 8V613 | THE BOEING COMPANY |
|
Techincal Specification:
| STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.345 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJF | | FIRST END LOCATION | ROUND END | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.190 INCHES NOMINAL | | FIRST END TIP RADIUS | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, INDEX | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.190 INCHES | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.190 INCHES NOMINAL | | SECOND END TIP RADIUS | 0.030 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.185 INCHES MINIMUM AND 0.186 INCHES MAXIMUM | | SHANK DIAMETER | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.375 INCHES NOMINAL |
|
|