|
|
|
National Stock Number:
5315-01-245-3889
Federal Supply Class:
5315
National Item Identification Number:
012453889
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MS20392-11C71 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-11C71 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| CHAMFER LENGTH | 0.077 INCHES MINIMUM AND 0.109 INCHES MAXIMUM | | DIAMETER | 0.869 INCHES MINIMUM AND 0.871 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.196 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.161 INCHES MINIMUM AND 0.181 INCHES MAXIMUM | | HEAD STYLE | FLAT | | HEIGHT | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | PIN CHAMFER ANGLE | 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 1.046 INCHES MINIMUM AND 1.078 INCHES MAXIMUM | | SHEAR STRENGTH | 90200 DOUBLE POUNDS PER SQUARE INCH | | SPECIAL FEATURES | SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR | | STYLE DESIGNATOR | STRAIGHT | | UNDER HEAD LENGTH | 2.500 INCHES NOMINAL |
|
|