|
|
|
National Stock Number:
5315-01-238-2363
Federal Supply Class:
5315
National Item Identification Number:
012382363
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | JDM 1045F,CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND | | 58.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.240 INCHES NOMINAL | | FIRST END TAPER ANGLE | 17.0 DEGREES MINIMUM AND | | 23.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.531 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.590 INCHES MINIMUM AND | | 0.670 INCHES MAXIMUM | | PIN OVERALL LENGTH | 7.140 INCHES MINIMUM AND | | 7.260 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 1.9949 INCHES MINIMUM AND | | 1.9980 INCHES MAXIMUM |
|
|