| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.170 INCHES NOMINAL |
| FIRST END LOCATION | SHOULDER END |
| FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| FIRST END STYLE | OVAL |
| FIRST STEP DIAMETER | 0.746 INCHES MINIMUM AND 0.748 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.215 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| INTERNAL DRIVE STYLE | SLOT |
| OVERALL LENGTH | 2.150 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 1018 OVERALL |
| NOMINAL THREAD SIZE | 0.437 INCHES |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END SLOT DEPTH | 0.120 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.130 INCHES NOMINAL |
| SECOND END STYLE | SLOTTED |
| SECOND STEP LENGTH | 0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.666 INCHES MINIMUM AND 0.668 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.864 INCHES MINIMUM AND 0.869 INCHES MAXIMUM |
| SPECIAL FEATURES | HOLE LOCATED ON THREADED END |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY1 CL3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TY1 SC1 ASSN STD 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OR ZINC OVERALL |
| THIRD STEP DIAMETER | 0.434 INCHES MINIMUM AND 0.436 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.835 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |