| DIAMETER | 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.094 INCHES NOMINAL |
| CHAMFER LENGTH | 0.030 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.070 INCHES NOMINAL |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM OVERALL AND 39.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT FILLISTER |
| HEIGHT | 0.310 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 416 OVERALL |
| PIN HEAD DIAMETER | 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 0.030 DEGREES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| SPECIAL FEATURES | THREADED HOLE 0.190-32UNF-3B CENTERED IN HEAD END 0.190 IN. DEEP |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 63.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDER HEAD LENGTH | 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |