|
|
|
National Stock Number:
5315-01-233-7835
Federal Supply Class:
5315
National Item Identification Number:
012337835
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10123224 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5315PL0851049 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS20392-1R25 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-1R25 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DIAMETER | 0.122 INCHES MINIMUM AND | | 0.124 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SHEAR STRENGTH | 3080 DOUBLE POUND | | CHAMFER LENGTH | 0.062 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 14.5 DEGREES MINIMUM AND | | 15.5 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.234 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM | | HEIGHT | 0.030 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM | | UNDER HEAD LENGTH | 0.897 INCHES MINIMUM AND | | 0.917 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.091 INCHES NOMINAL | | SPECIAL FEATURES | SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR |
|
|