| CHAMFER LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| DIAMETER | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.410 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
| HEAD STYLE | FLAT |
| HEIGHT | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | DRILLED SLOTTED END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 304 OR STEEL COMP 304L OVERALL |
| PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| PIN HEAD DIAMETER | 0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| SLOT LENGTH | 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| SLOT WIDTH | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDER HEAD LENGTH | 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |