|
|
|
National Stock Number:
5315-01-232-6792
Federal Supply Class:
5315
National Item Identification Number:
012326792
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 3283509-1 | 35962 | SAFRAN LANDING SYSTEMS CANADA INC |
|
Techincal Specification:
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END SLOT WIDTH | 0.500 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OVERALL | | PIN OVERALL DIAMETER | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM | | PIN OVERALL LENGTH | 1.820 INCHES MINIMUM AND 1.850 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | CONCENTRIC HOLE LOCATED IN SLOTTED END ALONG THE LONGITUDINAL CENTERLINE 0.450 IN. DEEP WITH 0.190 IN.-24 NC 2B 0.350 IN. MIN FULL THREAD FROM FACE A | | SURFACE FINISH | 32.0 MICROINCHES SHANK END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHANK | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 3,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL AND PHOSPHATE OVERALL | | SURFACE TREATMENT | CHROMIUM SHANK |
|
|