|
|
|
National Stock Number:
5315-01-196-8225
Federal Supply Class:
5315
National Item Identification Number:
011968225
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.510 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.531 INCHES NOMINAL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL COMP 1045 OVERALL | | PIN OVERALL DIAMETER | 1.7500 INCHES NOMINAL | | PIN OVERALL LENGTH | 8.130 INCHES MINIMUM AND 8.250 INCHES MAXIMUM | | SECOND END TAPER LENGTH | 0.390 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DTW 765 FSCM 75160 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL |
|
|