|
|
|
National Stock Number:
5315-01-195-8025
Federal Supply Class:
5315
National Item Identification Number:
011958025
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 11602350-1 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.218 INCHES NOMINAL | | CHAMFER LENGTH | 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | DIAMETER | 0.742 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | FEATURES PROVIDED | CASE-HARDENED | | FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL | | HARDNESS RATING | 89.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 91.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 0.250 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL | | PIN HEAD DIAMETER | 0.937 INCHES NOMINAL | | PIN CHAMFER ANGLE | 30.0 DEGREES NOMINAL | | UNDER HEAD LENGTH | 2.280 INCHES MINIMUM AND 2.344 INCHES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | D0D-P-16232 MIL SPEC 1ST TREATMENT RESPONSE OR QQ-P-416,TY 2,CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR CADMIUM OR CHROMATE OVERALL |
|
|