|
|
|
National Stock Number:
5315-01-111-4121
Federal Supply Class:
5315
National Item Identification Number:
011114121
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 412-4678004 ITEM 26 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 87684-1504 ITEM 26 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| FIRST END LOCATION | THREADED END | | FIRST END STYLE | SQUARE | | FIRST HOLE DIAMETER | 0.1600 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | INTERNAL DRIVE STYLE | SLOT | | OVERALL LENGTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-00465 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | COPPER OR COPPER ALLOY 642 OR COPPER ALLOY 606 OR COPPER ALLOY 614 OR COPPER ALLOY 630 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SHANK DIAMETER | 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM | | SHANK LENGTH | 0.250 INCHES NOMINAL | | SHOULDER DIAMETER | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNF |
|