|
|
|
National Stock Number:
5315-00-173-3447
Federal Supply Class:
5315
National Item Identification Number:
001733447
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 14-28116-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-28116-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 1.690 INCHES NOMINAL | | SHOULDER DIAMETER | 0.750 INCHES NOMINAL | | SHANK DIAMETER | 0.495 INCHES MINIMUM AND | | 0.505 INCHES MAXIMUM | | OVERALL LENGTH | 4.380 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.495 INCHES MINIMUM AND | | 0.505 INCHES MAXIMUM | | SECOND SHANK LENGTH | 2.610 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | SHORT SHANK END | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.186 INCHES MINIMUM AND | | 0.192 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.070 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SPECIAL FEATURES | HAS 0.245 IN. DIA,0.300 IN. W CIRCULAR GROOVE 0.510 IN. FROM LG SHANK END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76823 | | DESIGN CONTROL REFERENCE | 14-28116-1 |
|
|