|
|
|
National Stock Number:
5315-00-171-4419
Federal Supply Class:
5315
National Item Identification Number:
001714419
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 162B8279 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR | | PHOSPHATE ZINC OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 35.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.290 INCHES MINIMUM AND | | 0.330 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.280 INCHES MINIMUM AND | | 0.320 INCHES MAXIMUM | | SHANK DIAMETER | 0.248 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | OVERALL LENGTH | 1.020 INCHES MINIMUM AND | | 1.040 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.2500 INCHES MINIMUM AND | | 0.2505 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.470 INCHES MINIMUM AND | | 0.480 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.063 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.093 INCHES MINIMUM AND | | 0.113 INCHES MAXIMUM | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 05606 | | DESIGN CONTROL REFERENCE | 162B8279 |
|
|