|
|
|
National Stock Number:
5315-00-168-4497
Federal Supply Class:
5315
National Item Identification Number:
001684497
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 80-002-2 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP E4340 OR | | STEEL COMP 8740 OR | | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | PHOSPHATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 3,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 1.870 INCHES MINIMUM AND | | 1.910 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.618 INCHES MINIMUM AND | | 0.620 INCHES MAXIMUM | | SHANK DIAMETER | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | OVERALL LENGTH | 3.005 INCHES MINIMUM AND | | 3.025 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.045 INCHES MINIMUM AND | | 0.063 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | LARGE END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.438 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.870 INCHES MINIMUM AND | | 1.910 INCHES MAXIMUM | | SURFACE FINISH | 63.000 MICROINCHES OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 80-002-2 |
|
|