|
|
|
National Stock Number:
5315-00-137-2964
Federal Supply Class:
5315
National Item Identification Number:
001372964
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 699159 | 0ZTJ5 | AERO PRECISION INDUSTRIES LLC | | 699159 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MS09.07 FSCM 99167 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHOULDER DIAMETER | 0.319 INCHES MINIMUM AND | | 0.321 INCHES MAXIMUM | | SHANK DIAMETER | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 0.510 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED W/THRU HOLE | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.142 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND | | 0.131 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99167 | | DESIGN CONTROL REFERENCE | 699159 |
|
|