|
|
|
National Stock Number:
5315-00-135-0920
Federal Supply Class:
5315
National Item Identification Number:
001350920
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 215-70499-2 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| SHANK DIAMETER | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 2.880 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.115 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.080 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.080 INCHES NOMINAL | | SECOND UNDERCUT DIAMETER | 0.115 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.210 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.164 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.350 INCHES NOMINAL | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80378 | | DESIGN CONTROL REFERENCE | 215-70499-2 | | MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 1.210 INCHES NOMINAL | | SHOULDER DIAMETER | 0.310 INCHES NOMINAL |
|
|