|
|
|
National Stock Number:
5310-01-591-6448
Federal Supply Class:
5310
National Item Identification Number:
015916448
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 772059-6 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| HOLE DIAMETER | 0.184 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM | | MATERIAL | STEEL COMP 316 OVERALL | | RECESS ANGLE | 100.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|