|
|
|
National Stock Number:
5310-01-256-9740
Federal Supply Class:
5310
National Item Identification Number:
012569740
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-97S68E6 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 1.626 INCHES MINIMUM AND 1.646 INCHES MAXIMUM | | HOLE DIAMETER | 1.506 INCHES MINIMUM AND 1.526 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | MATERIAL | STEEL COMP 630 OVERALL | | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TOP RECESS ANGLE | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM | | TOP RECESS DIAMETER | 1.626 INCHES MINIMUM AND 1.646 INCHES MAXIMUM |
|
|