|
|
|
National Stock Number:
5310-01-245-7210
Federal Supply Class:
5310
National Item Identification Number:
012457210
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| MS35333-131 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35333-131 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1050 OR | | STEEL COMP 1551 OR | | STEEL COMP 1552 OR | | STEEL COMP 1053 OR | | STEEL COMP 1054 OR | | STEEL COMP 1055 OR | | STEEL COMP 1059 OR | | STEEL COMP 1060 OR | | STEEL COMP 1561 OR | | STEEL COMP 1062 OR | | STEEL COMP 1064 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | HOLE DIAMETER | 0.440 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.580 INCHES MINIMUM AND | | 0.592 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.016 INCHES MINIMUM AND | | 0.020 INCHES MAXIMUM |
|