|
|
|
National Stock Number:
5310-01-244-7570
Federal Supply Class:
5310
National Item Identification Number:
012447570
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 17/32IDX1-7/32ODX1/4THK | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | A-028-01N-0-01 | 10941 | CARVER PUMP COMPANY | | CLA,FORM4 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | D-04N-0-99-005 PC 11 | 10941 | CARVER PUMP COMPANY | | D-04N-0-99-010 PC 11 | 10941 | CARVER PUMP COMPANY | | QQ-N-281 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | QQ-N-281,CLA,FORM4 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| DEPARTURE FROM CITED DOCUMENT | MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS | | CRITICALITY CODE JUSTIFICATION | ZZZW | | PROPRIETARY CHARACTERISTICS | PACS | | SPECIAL FEATURES | MATERIAL IS VALVE BRONZE |
|
|