5310-01-243-5135, WASHER,FLAT

National Stock Number:
5310-01-243-5135

Federal Supply Class:
5310

National Item Identification Number:
012435135

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

092-06131-144-2262

94697

MOOG INC

Techincal Specification:

MATERIAL	STEEL COMP 301 OR
	STEEL COMP 302 OR
	STEEL COMP 303 OR
	STEEL COMP 303SE OR
	STEEL COMP 304 OR
	STEEL COMP 304L OR
	STEEL COMP 305 OR
	STEEL COMP 309 OR
	STEEL COMP 310 OR
	STEEL COMP 316 OR
	STEEL COMP 316L OR
	STEEL COMP 317 OR
	STEEL COMP 321 OR
	STEEL COMP 347 OR
	STEEL COMP 348 OR
	STEEL COMP 303MA OR
	STEEL COMP 303PB OR
	STEEL COMP 303CU OR
	STEEL COMP 303 PLUS X OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC ALL MATERIAL RESPONSES AND
	QQ-S-766 FED SPEC ALL MATERIAL RESPONSES AND
	QQ-W-423 FED SPEC ALL MATERIAL RESPONSES AND
	MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES AND
	MIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES AND
	ASTM-A-582 ASSN STD ALL MATERIAL RESPONSES OR
	AMS5640 ASSN STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	0.141 INCHES MINIMUM AND
	0.147 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	0.223 INCHES MINIMUM AND
	0.229 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.028 INCHES MINIMUM AND
	0.034 INCHES MAXIMUM

Click here to Register for Free 30-day Trial