|
|
|
National Stock Number:
5310-01-242-5994
Federal Supply Class:
5310
National Item Identification Number:
012425994
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 83-00112 | U0215 | WINDER POWER LIMITED | | 83-00112 | U5012 | COUNTRYMAN GROUP LTD | | A-25 468 00 | 52845 | KOHLER CO ENGINE PLANT DIV | | X-25-58 | 52845 | KOHLER CO ENGINE PLANT DIV | | X-25-58 | U0112 | HANCOX LTD |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.218 INCHES MINIMUM AND | | 0.223 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.021 INCHES MINIMUM AND | | 0.041 INCHES MAXIMUM |
|
|