|
|
|
National Stock Number:
5310-01-240-8919
Federal Supply Class:
5310
National Item Identification Number:
012408919
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| G372-62 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | ML620-62 | 55482 | MOUNT LOK PRODUCTS INC |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 0.165 INCHES MINIMUM AND 0.171 INCHES MAXIMUM BOSS | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND BOSS | | FLANGE DIAMETER | 0.344 INCHES NOMINAL | | FLANGE THICKNESS | 0.063 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/5,T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6,T4 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/3,T4 OR T3511 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL | | NOMINAL THREAD SIZE | 0.164 INCHES | | NUT COUNTERBORE DEPTH | 0.656 INCHES NOMINAL BOSS | | NUT DIAMETER | 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.966 INCHES MINIMUM AND 0.970 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 26512-G372 MANUFACTURERS STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SPECIAL FEATURES | TWO SLOTS LOCATED AT 180 DEG ON FLANGE OUTSIDE DIA,0.046 IN. RADIUS | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES | UNC |
|
|