|
|
|
National Stock Number:
5310-01-239-8859
Federal Supply Class:
5310
National Item Identification Number:
012398859
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 13206E0444-5 | 97403 | CECOM LR CENTER | | B18.22.1 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | B27.2-1965 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY OVERALL DIAMETER; DIAMETER; THICKNESS | | HOLE DIAMETER | 0.266 INCHES NOMINAL | | OVERALL DIAMETER | 0.560 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | NO. 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | A TYPE AND I GRADE | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.062 INCHES NOMINAL |
|
|